| System |
RGB liquid crystal shutter projection system |
| LCD Panel |
| Size |
0.75 inch x 3 (inorganic), Aspect Ratio 16:10 |
| Pixel Count |
1,024,000 (1280 x 800)x 3, Total pixels 3,072,000 |
|
| Projection lens |
Optional Lens |
| Light source |
330W |
| Screen size (Projection distance) |
40” – 400” 1.4m - 24.4m; 100”: 3.6m - 6.0m (Projection distance varies depending on the lens) |
| Colour reproducibility (when projecting video signal) |
Full color (1.07 billion colors) |
| Contrast ratio (Full on/Full off)*1 |
800:1 |
| Brightness*1 |
5,500 ANSI lumens |
| Uniformity |
90% |
| Audio output and speaker |
7W mono, 4cm (circular) x1 |
| Scanning frequency (Input) |
Horizontal: 15 - 100kHz, Vertical: 48 to 100Hz , Dot Clock: 140 MHz or less |
| Resolution (resizing, when using RGB signal) |
1280 x 800 dots (WUXGA dot resizing possible) |
| Terminals |
| PC Input |
Analog RGB input (x 2); D-sub 15; BNC 5-type |
| Video Input |
Digital input (x 1); HDMI x 1 Ver. 1.3 with Deep Colour; Video input (x 3); BNC 3-type (VIDEO/Y-Pb/Cb-Pr/Cr), RCA 3-type (VIDEO/Y-Pb/Cb -Pr/Cr), S-video |
|
| Graphical output |
Analog RGB (x 1); D-sub 15*2 |
| Audio Input/Output |
Audio input: Stereo mini jack x2,RCA (stereo L (mono), R) x 1; Audio output: Stereo mini jack x1 |
| Controller Input/Output and Other |
Wired remote control connection terminal; Mini jack x1; Wired LAN: RJ45 (100Base-TX/10Base-T); Control port (x 1): D-sub 9; USB terminal: type B x 1*3 |
| Operating temperature |
5 – 40°C |
| Power consumption |
| 100-120V |
406W/490W (Eco/Normal); Standby: 0.4W/22W (Eco/Network) |
| 200-240V |
385W/460W (Eco/Normal); Standby: 0.6W/24W (Eco/Network) |
|
| Power source |
AC 100 - 240 V, 50/60Hz |
| Dimensions (W x H x D) |
489.5 x 164 x 371.1mm |
| Weight |
8.9kg |
| Main accessories |
Removable power cord x1, D-sub 15 cable x1, PIN code-locking label, Quick reference guide, Owner’s manual, Remote control x1 (AAA battery x 2) |
*1 Measurement, measuring conditions and method oF notation all comply with ISO 21118 international standards.
*2 For analog signlas only. Partial restriction is set up for output signals. Not all types if input signals are supported.
*3 USB interface does not guarantee that every USB device is compatible.
